+86-371-67991755
Request Quote
The melt pump is installed at room temperature and operates at high temperature. Therefore, the influence of heat medium pipeline and thermal expansion of pump body on the normal operation of the pump must be considered to avoid increasing the additi
1. Check the parts connected with the pump at the inlet and outlet to ensure that the valve at the outlet is open. 2. Whether all bolts are locked according to the torque in Schedule 2 3. Are all heat pipes properly connected to pumps? 4. Relevant Se
Dismantling and Cleaning of Melt Pump 1. Carefully remove the pump from the equipment and place it in the vacuum heating furnace to raise the temperature slowly for two hours to 400-450 degrees. Temperature should not be overheated or it will easily
The melt pump provided by Zhengzhou Bate Melt Pump Manufacturer is the matching equipment of plastic extrusion industry. It is mainly used with extruders to improve the performance of extruders. The two main functions of extruders are heating, meltin
The bottom discharging pump of heat conducting oil heating kettle has a large flange opening design, which can make the high viscosity medium suck smoothly under vacuum conditions. Bottom discharge pump has the following three advantages: 1. It has s
batte extrusion pump
batte high temperature melt pum
plastic extrusion melt pump
Plastic extrusion pump(ZB-B)
Polymer extrusion melt pump(ZB-